Turbo Xtra SAE 15W40 / API CF-4

PACKS AVAILABLE: 1L, 25L, 54L, 210L

SPECIFICATION:
Meets and Exceeds API CF-4, IS: 13656-2002, Type E-DL2 MACK T-8A

PRODUCT DESCRIPTION
Shield Fleet Power Turbo is high-quality engine oil of HPDO (High Performance Diesel Oil). It contains a set of enriching additives acting as antioxidants, corrosion inhibitors and improving cleaning and dispersion properties as well as lubrication, viscosity and temperature properties. This oil can be used in high-pressure engines of passenger and commercial vehicles, trucks and buses.

FEATURES

  • Guarantees superior engine cleanliness and protection against corrosion.
  • Reduces engine wear by retarding deposits and carbon deposits formation.
  • Ensures easy start-ups at low temperatures.
  • Reduces the performance failure that might be caused by the sulphate ash content in the oil.
  • Helps in reducing refills.

RECOMMENDATIONS
Recommended specially for  Turbo charged heavy/ light commercial vehicles, Tractors, Jeeps and Cars.

PERFORMANCE LEVEL

Typical Characteristics
Specific Density at 29.5 o C 0.880
Kinematics Viscosity at 100o C 14.5-16.5
Viscosity Index (Min) 135
Flash Point, o C 220(T)
Pour Point o C (Max) -24
TBN,mg KOH /gm 11.5 Min.
* These are typical figures and do not constitute a specification.

HANDLING, HEALTH & SAFETY
Lubricant consisting of mineral oils with specific additives. In normal conditions of use this product presents no particular toxic hazard. All lubricants and greases, of any kind should be handled with great care, particularly avoiding any prolonged contact with the skin.

Prevent any splashing and keep away from combustible materials. Store under cover and away from any risk of pollution. The grease drums should be stored upright and surface of the grease should be smoothened to prevent oil separation into the cavity. Dispose off the used product and can correctly, don’t pour down drains.